IR660: USB SIR adapter(115.2Kbps)

IR660: Mini USB SIR adapter(115.2Kbps)


IR660	CD

Package	IR660
More pictures

Manual

Driver

application

Knowledge

Testing

FAQs

Price: $9.00

Buy it now!

Description

SMH-IR660 USB to IrDA adapter is for enabling IrDA wireless data communication through a standard USB port. Powered from USB bus, this product does not require any external power adapter. It supports SIR (2.4Kbps to 115.2Kbps) modes. The effective data transmission distance is from 0 to 1M. The reception or viewing angle in a typical environment is 30 degrees (+ / - 15). Use the product, you could transfer data with wireless connection for PC, PDA, Mobile Phone, digital camera, scanner and printer.

Features

-Meets IrDA 1.1 Physical Specifications -Max. Speed Supported: 115.2 Kbps -Easily enable IrDA function on the desktop PC through USB port -USB Plug and Play convenience -Fully compatible with USB 1.1 specification -No power adapter required -Low power consumption

Specification

-Communication speed at 9.6, 19.2, 38.4, 57.6,115.2Kbps
-Distance of 0 cm-100 mm and beyond.
-66mm x 31mm x 12mm 20g
-0.35W (Peak)
-No external power source needed

System Requirment

-IBM® PC Pentium or higher or compatible system
-Available USB port and CD-ROM drive
-Windows® 95, 98, ME, 2000, XP, Vista.

Package Content

-IR650 USB to IrDA Adapter
-Driver CD
-Installation Manual

INSTALLATION

WIN98 Driver Installation
Following the steps below to install the driver of USB to IrDA Adapter:
1 Power on the computers that you will connect the USB to IrDA Adapter and make sure the USB port is enabled and working properly.
2 Plug in the USB to IrDA Adapter into the USB port. Windows will detect an device and run the Add New Hardware Wizard to assist you in setting up the new device.
3 Insert the driver disk into CD-ROM driver, click Next to continue.
4 Select Search for the best driver for your device and click Next
5 Select Specify a location and type A:\Drv98 in the dialogue, then click NEXT
6 Windows will detect the driver and shows the U2IrDA, Click NEXT to continue. Windows will start to copy driver files. (You may be asked to Insert Windows 98 CD in your computer, follow the instruction)
7 Click Finish while installation is complete.
8 The following window appear, click on Yes to restart your computer.
9 To make sure that the installation is completely and the device can works properly. Go to check the Control Panel-System and check the following marked items exist the system properly, the installation is successfully complete.

WIN2000 Driver Installation
Following the steps below to install driver of USB to IrDA Adapter
1 Power on the computers that you will connect the USB to IrDA Adapter and make sure the USB port is enabled and working properly.
2 Plug in the USB to IrDA Adapter into the USB port. Windows will detect an unknown device and run the Found New Hardware Wizard to assist you in setting up the new device.
3 Insert the driver disk into drive A , click Next to continue.
4 Select Search for a suitable driver for my device (recommended) and click Next
5 Select Specify a location and type A:\Drv2K in the dialogue, then click NEXT
6 Windows will detect the driver and shows the U2IrDA. Click NEXT to continue until installation is complete.
7 Click Finish while installation is complete.
8 To verify the installation is successful, open the Device Manager; if the marked items appear in the system property, the installation is successfully complete.

WinME Driver Installation
Following the steps below to install driver of USB to IrDA Adapter:
1 Power on the computers that you will connect the USB to IrDA Adapter and make sure the USB port is enabled and working properly.
2 Plug in the USB to IrDA Adapter into the USB port. Windows will detect an unknown device and run the Add New Hardware Wizard to assist you in setting up the new device.
3 Insert the driver disk into drive A, click Next to continue
4 Select Search for the best driver for your device and click Next
5 Select Specify a location and type A:\DrvMe in the dialogue, then click NEXT
6 . Windows will detect the driver and shows the U2IrDA Click NEXT to continue until installation is complete.
7 Click Finish while installation is complete.
8 Select Yes to finish installation.
9 Check the System Property to ensure the installation is successful complete. Items appear in the system property, the installation is successful.

Windows XP Driver Installation
Following the steps below to install driver of USB to IrDA Adapter
1 Power on the computers that you will connect the USB to IrDA Adapter and make sure the USB port is enabled and working properly.
2 Plug in the USB to IrDA Adapter into the USB port. Windows will detect an unknown device and run the Found New Hardware Wizard to assist you in setting up the new device.
3 Insert the driver disk into drive A , click Next to continue.
4 Select Search for a suitable driver for my device (recommended) and click Next
5 Select Specify a location and type A:\DrvXP in the dialogue, then click NEXT
6 Windows will detect the driver and shows the U2IrDA. Click NEXT to continue until installation is complete.
7 Click Finish while installation is complete.
8 To verify the installation is successful, open the Device Manager; if the marked items appear in the system property, the installation is successfully complete.